Chloride ManageUPS User's Guide download pdf (Page 46)

SECTION V: DEVICE SETTINGS

Device Settings 913-623 @Rev A Section V, page

Configuration

NOTE: Your UPS may

not support all of the

configuration options

listed in this document.

Temperature Threshold:

The maximum internal

UPS temperature

allowed before triggering

UPS over temperature

alarm.

Overload Threshold:

The maximum percent

load allowed before

triggering a UPS

overload alarm.

Power Margin:

The maximum percent load allowed before triggering a Power Margin Exceeded

Low/High Transfer Point: (Stand-by & Line Interactive)

The transfer points determine the range of acceptable output voltage values. If the input

line voltage drops below the lower transfer point or rises above the upper transfer point,

the UPS takes corrective action either by using the booster or switching to battery power.

The proper setting of transfer points depends on the voltage tolerance of the devices

connected to the UPS. Setting the transfer points closer together will cause the UPS to

provide a more tightly controlled voltage, but may also cause the UPS to switch to battery

power more frequently, depending on the quality of your AC line power. The factory

default values are sufficient for most applications.

Battery Replacement Date:

The date on which the UPS was first commissioned or when the battery was last

replaced.

This value will be set automatically the first time ManageUPS boots up and retrieves a

valid date from a network time (NTP) server. The assumption is that the ManageUPS is

installed at about the same time the UPS is first installed and commissioned.

It is up to the user to set this date to a more accurate commissioning date and to maintain

the date when batteries are replaced in the future.

Replace Battery When:

Counts elapsed time from the value in the

Battery Replacement Date

field.

Low Battery Alarm Duration:

Triggers the UPS Low Battery alarm when estimated minutes remaining -- as computed

by the UPS, or limited by the

Authorized Autonomy

setting -- reaches this value.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 82 83

Comments to this Manuals

No comments

Chloride ManageUPS User's Guide Page 46

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) Chloride ManageUPS