Chloride ManageUPS User's Guide download pdf (Page 45)

ECTION V: DEVICE SETTINGS

page, Section V 913-623 @Rev A Device Settings

Control

Select one of the control actions by choosing the corresponding radio button. Click

the "Perform Selected Action" button to start the action.

NOTE: Your UPS may not support all of the options listed in this help dialog.

Reset the Min/Max Measured Voltage Seen:

A record of the Minimum and Maximum input line voltages are stored in your UPS, or in

the ManageUPS UPS agent

Mute the Audible Alarm:

This action mutes the audible alarm for the duration of the current event. It does not

disable the alarm. If you want to silence the audible alarm for future events, navigate to

the

UPS Configuration

menu. The control for the audible alarm is in the

General Settings

dialog area.

Reboot the UPS:

This action causes the UPS output to immediately turn off and then restart after the time

specified.

WARNING: When you initiate the reboot control, all loads connected to this UPS will lose

power and will then be turned back on when the UPS output is re-energized.

Make sure this is what you want to do before you initiate this control!

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 82 83

No comments

Chloride ManageUPS User's Guide Page 45